Products Catalog: embedded systems evaluation kit xsbase300-s - shenzhen 51board information technology co., ltd.

Products Catalog: embedded systems evaluation kit xsbase300-s

(Product Photo)

Origin:

China

Payment Method:

Telegraphic Transfer (T/T)

Pack. & Delivery:

carton

Specification:

XSBase300-S Development Platform
XSbase300-S is based on Marvell PXA30X serial processor which belongs to the 3rd generation of Intel XScale technology ( Monahans serial) . It’ s a multifunction platform which supports Linux / WinCE and is applicable to teaching, experiment and development. With powerful functions and various interfaces, Xsbase300-S is a good embedded reference design and experiment systems, it will help the user to learn the new features of Marvell PXA300 and the basic embedded systems development skills.

XSbase300-S consists of the CPU, NAND-FLASH DDR-RAM CPLD core part and peripheral interfaces. The CPU PXA300 is a highly integrated SOC microprocessor released by Marvell, with features of dynamic voltage adjustment, dynamic frequency regulation and mature power management, it also provides the advanced MIPs/ Mw performance.

PXA300 can save 60% power consumption compared to its beforehand, the Intel PXA27X serial processor. For the handset, PXA300 can prolong 40% of the battery life. With the mode “ 88AP303-AI-BGF2C624-TN22” , Its frequency can come up to 624MHz, and the work range is -40 ~ 85 . XSbase300-S will work at 5V external power. The built-in 3500Ma/ h li battery can support the Xsbase300-S for 3hours, it supports socket recharge and USB recharge.

Regarding the OS, XSbase300-S supports Linux 2.6.21 and Windows CE 5.0. And we will provide rich software resources for application development. XSbase300-S is a reference design for GPS, multimedia device and so on. You can demonstrate it directly to the end-user, OEM providers network operators etc. It can save you cost on HR and development up to RMB200, 000.

Xsbase300-S hardware specification
Processor MARVELL Xscale PXA300 624MHz 88AP303-AI-BGF2C624-TN22
DDR-RAMs 64MBYTE
NAND-FLASH 256MBYTE
PMU LP3972-A51 4 PMU from NS
Ethernet 10M/ 100M port with functions of downloading image and connecting internet.
LCD 5.6” TFT LCD 480* 320; 3.5” TFT LCD compatible 320* 240
Touch Screen 4 wire type touch screen
JTAG interface Connecting emulator , to download/ debug program
RTC Support RTC
MMC/ SD port 2 compatible MMC card and SD card
FF serial port 1, supporting baud rate: 38400; printing debug information
BT serial port 1
Ir serial port 1
USB HOST 1 * host port USB-HOST 1.1
USB CLIENT 1 * USB slave port, USB-SLAVE 2.0
LEDo 8 circuit LED
Keypad 8 * key , PXA300 matrix keypad
Speaker 1* external speaker
Mic / Record 1 * Mic input port support the record function
Earphone 1 * earphone output port
TV-OUT interface 1 connecting the video/ radio signal with TV.
CAMERA 1* camera port 1.3M pixel separate Camera module, optional
Expansion port
WI-FI 1 separate WIFI module, optional
Battery 1* 3500mA/ h built-in li-battery 3hours continuation , supports socket recharge and USB recharge.

Xsbase300-S Software Specification as follows
Linux BSP
Item Name Description
Bootloader BLOB Download by emulator, NAND FLASH setup
Linux Kernel Linux 2.6.21 Download by Ethernet port , enter into LINUX system
Driver LAN Driver LAN91C113 driver
LCD Driver 5.6” lcd, 3.5” lcd Frame buffer driver
Touch Screen Driver 5.6” lcd, 3.5” lcd touch screen driver
RTC Driver RTC4513 driver
SD/ MMC Driver 2 * SD/ MMC driver
USB-HOST Driver USB-HOST 1.1 full speed 12Mbps driver
FF Serial Driver Fully functional serial drive
BT Serial Driver Blue tooth serial driver
IR Serial Driver IR Serial Driver
LED Display Driver 8 circuit LED display driver
KEYPAD Driver 8 keypad matrix keypad and direct keypad driver
Earphone And SPK Driver
MIC Driver
TV-OUT Driver TV Radio , CH7024
CAMERA Driver OV9650/ 1.3m pixel camera driver
BATTERY Driver Battery show driver
File system JFFS2 support QT/ Embeded GUI

WINCE BSP
Item Name Description
Bootloader EBOOT Download by emulator, NAND FLASH setup
WINCE5.0 NK Download by Ethernet port , enter into WinCE system( SD card download optional)
Driver LAN Driver LAN91C113 driver
LCD Driver 5.6” lcd, 3.5” lcd driver
Touch Screen Driver 5.6” lcd, 3.5” lcd touch screen driver
RTC Driver RTC4513 driver
SD/ MMC Driver 2 * SD/ MMC driver
USB-HOST Driver USB-HOST 1.1 full speed 12Mbps driver
USB-SLAVE Driver USB-SLAVE 1.1 full speed 13Mbps driver
FF Serial Driver Fully functional serial drive
BT Serial Driver Blue tooth serial driver
IR Serial Driver IR Serial Driver
LED Display Driver 8 circuit LED display driver
KEYPAD Driver 8 keypad matrix keypad and direct keypad driver
Earphone And SPK Driver
MIC Driver
TV-OUT Driver TV Radio , CH7024
WIFI Driver 802.11g driver
BATTERY Driver Battery show driver

Request for Quote

Your inquiry will be recorded in "Member Trade Mail".

Recommend to your friends